 |
My kiln is an Oriental climbing kiln of two
chambers, This is the fourth I have built,
each kiln I have constructed has been
modified according to my experiences with
the preceding kilns, hopefully retaining the
virtues of the earlier one's whilst eliminating
some of the faults.
My latest kiln is fired using a combination
of oil and wood. The first chamber (around
50 cubic foot) is fired with two oil burners up
to 1000° C at which point I may finish off with
wood or oil (depends on the glazes) on
reaching cone 11 in chamber 1, chamber 2
is around 1000° C from the exhaust heat alone.
Chamber 2 is finished off with wood only.
